Penguatan Tata Kelola Bengkel melalui Pelatihan K3, Implementasi SOP, dan Optimalisasi Toolset di Bengkel Nandar Automotive

Susi Tri Umaroh; Sudirman Rizki  Ariyanto; Ferly  Isnomo Abdi; Warju Warju; Lailatus Sa'diyah Yuniar Arifianti; Yustin Setiya Widoretno

doi:10.37478/abdika.v6i1.7428

Authors

Susi Tri Umaroh Universitas Negeri Surabaya, Surabaya, Indonesia
Sudirman Rizki Ariyanto Universitas Negeri Surabaya, Surabaya, Indonesia
Ferly Isnomo Abdi Universitas Negeri Surabaya, Surabaya, Indonesia
Warju Warju Universitas Negeri Surabaya, Surabaya, Indonesia
Lailatus Sa'diyah Yuniar Arifianti Universitas Negeri Surabaya, Surabaya, Indonesia
Yustin Setiya Widoretno Universitas Negeri Surabaya

DOI:

https://doi.org/10.37478/abdika.v6i1.7428

Abstract

This community service program was implemented to strengthen the operational governance of Nandar Automotive Workshop, which faces several fundamental issues, including limited knowledge of occupational health and safety (OHS), absence of documented Standard Operating Procedures (SOPs), and insufficient ergonomic toolsets. The program aimed to improve workplace safety, standardize service procedures, and enhance repair productivity through K3 training, SOP development, and optimized tool usage. The implementation involved needs assessment, training sessions, mentoring, and evaluation using pre–post testing, observation checklists, and time-efficiency measurements. The results showed a substantial improvement in participants’ understanding of OHS, with average scores increasing from 50% to 80%. SOP compliance also increased significantly, from 30% to 83%, following structured socialization and mentoring. Toolset optimization reduced the average service time from 63 minutes to 50 minutes, increasing work efficiency by 21%. These achievements indicate that integrating competency development, standardized procedures, and ergonomic tools effectively enhanced organizational performance and the safety culture at the partner workshop. Follow-up recommendations include continuous mentoring, adoption of digital service records, and advanced diagnostic training to strengthen the workshop’s long-term competitiveness.

Downloads

Download data is not yet available.

Keywords:

Community service, Automotive workshop, Occupational health and safety, SOP implementation, Toolset optimization

References

Adami, P., Rodrigues, P. B., Woods, P. J., Becerik-Gerber, B., Soibelman, L., Copur-Gencturk, Y., & Lucas, G. (2021). Effectiveness of VR-based training on improving construction workers’ knowledge, skills, and safety behavior in robotic teleoperation. Advanced Engineering Informatics, 50, 101431. https://doi.org/10.1016/j.aei.2021.101431

Ana, S., Palin, Y., & Tonapa, E. (2025). Hubungan Penggunaan APD, Pengetahuan K3, dan Ergonomi Dengan Kejadian Kecelakaan Kerja Di Sektor Usaha Informal Pada Pekerja Pengemasan Ikan “Mandiri 77” Di Kecamatan Biduk-Biduk. PREPOTIF?: Jurnal Kesehatan Masyarakat, 9(2022), 7324–7335.

Borodina, N., Cheberiachko, S., & Deryugin, O. (2020). Ergonomic Analysis of Hand Tools for Car Service Conditions. Avtoshliakhovyk Ukrayiny, 264(4), 10–21. https://doi.org/10.33868/0365-8392-2020-4-264-10-21

Imansyah, M. F., Aryaputra, V., Yuniyanto, E., Alfauzi, S. S. M. F. F., Biantoro, M. K. P., & Mohammad Alfin Eagan Cavenaugh6. (2025). Transformasi Model Bisnis UMKM Otomotif?: Perencanaan dan Perancangan Layanan Servis Motor Keliling Berbasis Digital di Bengkel HKU Surabaya Performance. AKSI KITA: Jurnal Pengabdian Kepada Masyarakat, 1(3), 326–339.

Jatmoko, D., Widiyatmoko, Fadilah, M. R., Prasetiawan, P., Wulandari, B., & Nasrullah, H. (2025). Penguatan Kapasitas Usaha Mikro Kecil dan Menengah Bengkel Otomotif Melalui Pelatihan Sistem Starter Berbasis Mikrokontroler. Aspirasi: Publikasi Hasil Pengabdian Dan Kegiatan Masyarakat, 3(5), 117–127.

Mufarida, N. A., & Muarifin. (2025). Desain Alat Khusus Pemberhenti Puli pada Air Fan Cooler di PT. XYZ LNG untuk Mengurangi Resiko Kecelakaan Kerja. J-Proteksion: Jurnal Kajian Ilmiah Dan Teknologi Teknik Mesin, 9(2), 122–128. https://doi.org/10.32528/jp.v9i2.2793

Nikita, A. A., Kusumastuti, D. W., Tinggi, S., Ekonomi, I., & Sukoharjo, K. (2025). Pengaruh Penerapan Standar Operasional Prosedur (SOP) Terhadap Efisiensi Waktu dan Output Gudang Bahan Baku Pada Perusahaan. JURNAL MEDIA AKADEMIK (JMA), 3(11), 1–20.

Saputra, Y. K., & Sampurno, Y. G. (2022). Analisis Penerapan Keselamatan dan Kesehatan Kerja Pada Kompetensi Keahlian Teknik Kendaraan Ringan SMK N 1 Sedayu. Jurnal Pendidikan Vokasi Otomoti, 5(1), 71–80.

Sari, P. A., Hidayat, V. F. T., & Yupa, A. F. (2024). Identifikasi Potensi dalam Upaya Perencanaan Masterplan Desa Wisata Sumbersawit, Magetan, Jawa Timur. Jurnal Syntax Admiration, 5(8), 3016–3023. https://doi.org/10.46799/jsa.v5i8.1430

Satria, V. A., & Christian, T. F. (2024). Application of Standard Operational Procedures to The Performance of PT Satu Roda Indonesia Employees. International Journal of Review Management Business and Entrepreneurship (RMBE), 4(2), 69–76. https://doi.org/10.37715/rmbe.v4i2.5628

Silva, N. N., & Rosdiana, W. (2025). Penyusunan Standar Operasional Prosedur (SOP) Pelayanan Administrasi Non-Kependudukan Di Kelurahan Tambaksari Kota Surabaya Development. Inovant, 3(35), 85–110.

Tan, A. B. C., van Dun, D. H., & Wilderom, C. P. M. (2024). Lean innovation training and transformational leadership for employee creative role identity and innovative work behavior in a public service organization. International Journal of Lean Six Sigma, 15(8), 1–31. https://doi.org/10.1108/IJLSS-06-2022-0126

Trap, M. P. U. dengan P. K. A. S. S. K. D. M. I. (2021). Model Pemberdayaan UMKM dengan Pendekatan Kolaborasi ABGC Sebagai Strategi Keluar Dari Middle Income Trap. Inspire Journal: Economics and Development Analysis |, 1(2), 47–60.

Wildawati, M., Tahura, T. L., & Pentana, S. (2022). Pengembangan Kewirausahaan Berbasis Potensi Lokal dan Pemberdayaan Masyarakat Terhadap Peningkatan Literasi Ekonomi Rumah Tangga Strategi ABG-C (Academic, Business, Government, and Community) di PKBM Al-Manar Medan Sumatera Utara. Jurnal Ekonomi Bisnis Digital, 1(2), 141–152.

Yulinda, A. T., Kusuma, M., Arianto, T., & Yuniarti, R. (2025). Strategi Penguatan SDM dan Pemasaran Digital Bagi Pelaku UMKM di Kota Bengkulu. Jurnal Solusi Masyarakat (JSM), 3(2), 89–98. https://doi.org/10.29103/jsm.v3i2.22488