Pengaruh Arah Aksial, Keberadaan Buku Dan Ruas Terhadap Kadar Air Dan Berat Jenis Bambu Dikawasan HKm Desa Aik Bual

Authors

  • Febriana Tri Wulandari Jurusan Kehutanan, Fakultas Pertanian, Universitas Mataram
  • Radjali Amin Pasca Sarjana Institut Teknologi Yogyakarta

DOI:

https://doi.org/10.37478/agr.v16i1.2552

Abstract

Among the community, bamboo is well known for its excellent utilization, starting from its sturdy, resilient, straight stems, which are easy to split, work with, and shape. In addition, the price of bamboo is cheaper and easily found in residential areas. One of the bamboo-producing areas found in the West Nusa Tenggara region is the Aik Bual Village HKm. It is known that research related to the physical properties of bamboo has not been carried out in the area. Physical properties become a benchmark in seeing cracks and breaks in bamboo caused by high water content and low specific gravity. This study aims to review the four types of bamboo in the Aik Bual HKm area against the influence of axial direction, the presence of books and internodes, moisture content and specific gravity. Fresh water content of petung bamboo, ampel bamboo, string bamboo, galah bamboo: 90,19%; 102,72%; 122,70%; 138,95%. Air dry moisture content of petung bamboo, ampel bamboo, string bamboo, galah bamboo: 12,31%; 13,80%; 12,27%; 11,95. Fresh specific gravity of petung bamboo, ampel bamboo, string bamboo, galah bamboo: 0,63; 0,58; 0,52; 0,49. Air dry specific gravity of petung bamboo, ampel bamboo, string bamboo, galah bamboo: 0,70; 0,71; 0,57; 0,61. Furnace dry specific gravity of petung bamboo, ampel bamboo, string bamboo, galah bamboo as follows: 0,72; 0,70; 0,62; 0,59. Of the four types of bamboo used, it is known that the axial direction, the presence of books and internodes do not have a significant effect on the moisture content and specific gravity.

Downloads

Download data is not yet available.

Keywords:

Axial Direction, Presence Of Nodes And Joints, Specific Gravity, Water Content

References

Abdullah, A. H. D., Karlina, N., Rahmatiya W., Mudaim S., Patimah, Fajrin, A.R. (2014). Physical and Mechanical Properties of Five Indonesian Bamboos. Earth and Environmantal science Journal, Vol. 10, 1

Barly, Agus Ismanto, Dominicus Martono, Abdurachman & Andianto. 2012. Sifat Fisis DanStabilisasi Dimensi Beberapa Jenis Bambu Komersial. Jurnal Penelitian Hasil Hutan hal Vol.30 No.3, 163-170.

Basri & Sarifudin, 2006. Sifat Kembang Susut dan Kadar Air Keseimbangan Talin (Gigantocloa apus.Kurtz) Pada Berbagai umur dan Tingkat kekeringan. Jurnal Penelitian Hasil Hutan Vol.24 No.3 hal 1-8.

Dika Adiatna. Variasi Aksial Sifat Fisika Bagian Batang dan Cabang Bambu Duri (Bambusa bluemeana BL.Ex.Schult.F.) di Desa Pengemburan Kecamatan Pujut Kabupaten Lombok Tengah. Jurusan Kehutanan. Skripsi. Universitas Mataram.

Efrida Basri &Rohmah Pari, 2017. Sifat Fisis Dan Pengeringan Lima Jenis Bambu. Jurnal Penelitian Hasil Hutan Vol.13 No.1 hal 1-13.

Eskak, E. (2016). Bambu Ater (Gigantochloa atter) sebagai Bahan Substitusi Kayu pada Ukiran Asmat. Jurnal Dinamika Kerajinan dan Batik, Vol. 33 (No.1), 55-66.

Hanafiah, K.A. 2016.Rancangan Percobaan. Penerbit PT Raja Grafindo Persada. Jakarta.

Irawati, I. S. dan Saputra, A. 2012. Analisis Statistik Sifat Mekanika Bambu Petung, Prosiding Simposium Nasional Rekayasa Dan Budidaya Bambu I 2012, Rekayasa Bambu Sebagai Solusi Pelestarian Lingkungan. ISBN: 978-602-95687-6-9, 30.Yogyakarta.

Mochsin,Fadillah H. Usman & Nurhaida, 2014. Stabilitas Dimensi Kayu Berdasarkan SuhuPengeringan dan Jenis Kayu. Jurnal Hutan Lestari 2 (2): 229-241.

Pujirahayu, N. 2012. Kajian Sifat Fisik Beberapa Jenis Bambu di Kecamatan Tonggauna Kabupaten Konawe. Jurnal Agriplus, Vol.02 (No.02), 224-230.

Prawirohadmojo., (2012). Sifat-sifat Fisika Kayu. Yogyakarta, Indonesia: Cakrawala Media.

Prayitno, 2008.. Pengujian Sifat Fisika Mekanika. Universitas Gadjah Mada. Yogjakarta. 2008.

Rini,D.S.2018. Sifat Fisika Bambu Petung (Dendrocalamus asper (Schult.f.) Backer ex Heyne) dari KHDTK (Kawasan Hutan Dengan Tujuan Khusus) Senaru Berdasarkan Posisi Aksial. Jurnal belantara. Vol 1,No 2.

Rini,D.S, Wulandari,Irwan M.L.A. 2017. Studi Jenis Dan Persebaran Bambu Di kawasan Hutan Dengan Tujuan Khusus (KHDTK) Senaru. Jurnal Sangkareng Mataram.Volume 3 No 4.

Sukaryana, I. G. (2019). Sifat Fisika Bambu Galah (Gigantochloa Atter) berdasarkan Arah dan Perbedaan Tempat Tumbuh. Jurusan Kehutanan, Universitas Mataram.

Ulfah Diana U. Analisis Sifat Fisika Bambu Apus (Gigantochola apus KURZ) Berdasarkan Posisi Sepanjang Batang. Jurnal Hutan Tropis Borneo Vol.07 No.19. 2006

Wulandari & Radjali Amin, 2022. Sifat Fisika Dan Mekanika Papan Laminasi Kayu Sengon. Jurnal Hutan Tropika Vol.17 No.1 hal 1-11.

Wulandari & Ni Putu Ety Lismaya Dewi, 2022. Karakteristik Batang Dan Sifat Fisika Bambu Tali (Gigantochloa Apus (Bi. Ex Schult.) Kurz) Di Kawasan Hkm Desa Aik Bual, Kabupaten Lombok Barat, Indonesia. Jurnal Daun Vol.9 No.1 hal 1-12.

Wulandari, 2021. Deskripsi Sebaran Jenis Dan Sifat Fisika Bambu Di Kawasan Hutan DenganTujuan Khusus (Khdtk) Senaru, Jurnal Hutan Tropis Vol. No.1 hal 1-12.

Wulandari, 2020. Distribution And Physical Characteristics Of BamboosIn The Community Forest Of Aik Bual Village. Jurnal Media Bina IlmiahVol.14 No.

Wulandari, 2019. Sifat Fisika Bambu Tali (Gigantochloa Apus) Berdasarkan Arah Aksial. Jurnal Sangkareang Mataram Vol.5 No.1 hal 1-5.

Wulandari, Irwan Mahakam Lesmono Aji & Dwi Sukma Rini 2018. Identifikasi Jenis Bambu Dikawasan Hkm Desa Aik Bual. Jurnal Sangkareang Mataram Vol.4 No.4 hal 1-5.

Wulandari, 2018. Variasi Kadar Air Tiga Jenis Bambu Berdasarkan Arah Aksial. Jurnal Sangkareang Mataram Vol.4 No.3 hal 1-4.

Wulandari, F.T. (2014). Sifat Fisika Empat Jenis Bambu Lokal di Kabupaten Sumbawa Barat. Jurnal Media Bina Ilmiah, Vol.08 (No.07), 24-28.

Widjaja, E. A. (2001). Identikit Jenis-jenis Bambu di Kepulauan Sunda Kecil. Bogor, Indonesia: Puslitbang Biologi-LIPI.

Downloads

Published

2023-05-23

Issue

Section

Articles